top of page

Mysite Group

Public·26 members

Icom CS-V8000 Cloning Software Crack


Icom CS-V8000 Cloning Software Crack: How to Program Your IC-V8000 Mobile Transceiver




The Icom IC-V8000 is a powerful and versatile VHF FM transceiver that offers 75 watts of output power, 207 memory channels, and a wide range of features. However, to fully customize and optimize your radio, you need the Icom CS-V8000 cloning software. This software allows you to edit the frequency, tone, offset, scan settings, and other parameters of your radio from your computer. You can also backup and restore your data, or clone it to another IC-V8000.


Unfortunately, the Icom CS-V8000 cloning software is not free. You have to purchase it from an authorized dealer or online retailer. The price may vary depending on the seller, but it usually costs around $50. Moreover, you need a special cable to connect your radio to your computer. The cable is called OPC-478UC, and it has a USB connector on one end and a 3.5 mm plug on the other end. The cable also costs around $50.


DOWNLOAD: https://t.co/0pC7OWI4Tt


So, if you want to program your IC-V8000 with the official software and cable, you have to spend about $100. That's quite expensive for some users who just want to tweak their radios. Is there a cheaper or free alternative? Yes, there is. In this article, we will show you how to use a cracked version of the Icom CS-V8000 cloning software and a generic USB-to-serial cable to program your IC-V8000.


Disclaimer




Before we proceed, we have to warn you that using a cracked software and an unofficial cable may void your warranty, damage your radio, or violate the law. We are not responsible for any consequences that may arise from following this guide. Use it at your own risk.


What You Need




To program your IC-V8000 with a cracked software and a generic cable, you need the following items:



  • An Icom IC-V8000 radio



  • A generic USB-to-serial cable with a 3.5 mm plug (you can find it on eBay or Amazon for less than $10)



  • A computer with Windows operating system (the cracked software may not work on Mac or Linux)



  • A cracked version of the Icom CS-V8000 cloning software (you can download it from [this link] or [this link])




How to Program Your IC-V8000




Once you have all the items ready, follow these steps to program your IC-V8000:



  • Install the driver for your USB-to-serial cable on your computer. You can find the driver on the CD that came with the cable, or download it from the manufacturer's website.



  • Extract the cracked version of the Icom CS-V8000 cloning software from the zip file that you downloaded. You will see a folder called "CS-V8000" with several files inside.



  • Run the file called "setup.exe" to install the cloning software on your computer. Follow the instructions on the screen.



  • Connect your IC-V8000 radio to your computer using the USB-to-serial cable. Make sure the radio is turned off.



  • Launch the cloning software from your desktop or start menu. You will see a window like this:




  • Select the COM port that corresponds to your USB-to-serial cable from the drop-down menu at the top left corner of the window. If you are not sure which port it is, you can check it in the device manager of your computer.



  • Click on "Read" button at the top right corner of the window. The software will try to read the data from your radio. If successful, you will see a message like this:




  • You can now edit the data on your radio using the tabs and buttons on the window. You can change the frequency, tone, offset, scan settings, and other parameters of each memory channel. You can also add or delete channels, or copy and paste data from one channel to another. For more details on how to use the software, you can refer to the user manual of the official Icom CS-V8000 cloning software [here].



  • When you are done editing, click on "Write" button at the top right corner of the window. The software will try to write the data to your radio. If successful, you will see a message like this:




  • Turn off your radio and disconnect it from your computer. You have successfully programmed your IC-V8000 with a cracked software and a generic cable.




Conclusion




In this article, we have shown you how to program your Icom IC-V8000 with a cracked version of the Icom CS-V8000 cloning software and a generic USB-to-serial cable. This method can save you money and time, but it also has some risks and limitations. We recommend that you use the official software and cable if you can afford them, or if you want to avoid any potential problems. However, if you are willing to take the chance, you can try this method at your own risk.


About

Welcome to the group! You can connect with other members, ge...
bottom of page